Pedrollo pump with pressure regulator 4CPm100-EP cod. K63CPN286A1
zoom_out_map
chevron_left chevron_right

Pedrollo pump with pressure regulator 4CPm100-EP cod. K63CPN286A1

Pedrollo pump with pressure regulator 4CPm100-EP cod. K63CPN286A1

Multi-impeller centrifugal electric pump for domestic use with electronic pressure regulator.

€533.01 VAT included €436.89 (VAT excl.)
VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Pedrollo pump with pressure regulator 4CPm100-EP cod. K63CPN286A1

  • Liquid type: Clean water
  • Uses: domestic
  • Uses: irrigation, water supply, pressure boosting systems
  • Typology: surface
  • Family: multi-impeller centrifuges

Single-phase electric pumps complete with electronic regulator programmed for starting and stopping the pump, when opening and closing the tap. In case of lack of water it ensures the stop of the pump.

They are recommended for pumping clean water and chemically non-aggressive liquids for the materials making up the pump.

Due to their reliability and low noise, they are widely used in the domestic sector and in particular for the distribution of water in combination with small or medium-sized autoclave tanks, for irrigation of orchards or gardens, etc.

The installation must be carried out in closed places or in any case protected from bad weather.

Data sheet
Pedrollo
K63CPN286A1
8052230040464
Scheda tecnica Pedrollo

MOTOR

Guy Voltage P2 power
Single phase 230V 240V kW hp
50Hz 6.0A 6.0A 0.75 1

PERFORMANCE

Q m3/h 0 0.3 0.6 0.9 1.2 1.5 1.8 2.4 3.0 3.6 4.2 4.8 5.4 6.0 6.6 7.2 7.8
l/min 0 5 10 15 20 25 30 40 50 60 70 80 90 100 110 120 130
h meters 50 50 49 48 47 46 45 42 39.5 37 34 30.5 26.5 22 17 11 5

CHARACTERISTICS

Suction body Cast iron with cataphoresis treatment provided with ISO 228/1 threaded ports
Cover AISI 304 stainless steel
Impeller Noryl
Diffusers Noryl complete with anti-wear rings
Drive shaft AISI 431 stainless steel
Isolation F class
Protection IPX4
liquid temperature from -10°C to +40°C
Room temperature up to +40°C
Capacitor 20 μF - 450 VL

Dimensions and weight

to f h h1 h2 h3 t n2 w s
135 382 192 134 38 172 158 118 1 10
DN1 DN2 Weight
1" 1" 14.2kg
DOWNLOAD
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included