Pedrollo monobloc submersible pump 4BLOCKm 4/6 cod. 49M42406LA1
Pedrollo monobloc submersible pump 4BLOCKm 4/6 cod. 49M42406LA1
4 inch monoblock electric submersible pumps in stainless steel ready to install.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Pedrollo monobloc submersible pump 4BLOCKm 4/6 cod. 49M42406LA1
- Liquid type: Clean water
- Uses: domestic
- Uses: irrigation, water supply, pressurization systems
- Type: submerged
- Family: 4" monobloc
Monoblock submersible electric pumps in stainless steel ready to install.
They are complete with:
- built-in capacitor and thermal motor protector;
- 20 m power cable.
They are recommended for supplying clean water from wells even in the presence of sand (up to 200 g/m³).
Due to their high performance and reliability they are recommended for use in the domestic sector, for automatic water distribution in combination with autoclaves, for irrigation, etc.
Limits of use:
- Liquid temperature up to +35 °C
- Maximum sand content 200 g/m³
- Depth of use up to 60 m below the water level
- Vertical and horizontal operation
- Starts/hour: 20 at regular intervals
- Continuous duty S1
MOTOR
| Guy | Voltage | Power P2 | ||
| Single phase | 230V | 240V | kW | HP |
| 50Hz | 4.0A | 3.8A | 0.55 | 0.75 |
PERFORMANCE
| Q | m3/h | 0 | 1.2 | 1.5 | 2.4 | 3.6 | 4.5 | 6.0 |
| l/min | 0 | 20 | 25 | 40 | 60 | 75 | 100 | |
| H | meters | 47 | 44.5 | 44 | 41 | 35.5 | 29.5 | 15 |
CHARACTERISTICS
| Delivery body and pump jacket | AISI 304 stainless steel, equipped with ISO 228/1 threaded delivery port |
| Pump bearing | Fixed part in EPDM |
| Impellers | Delrin |
| Speakers | Noryl |
| Stadium boxes | AISI 304 stainless steel |
| Pump shaft | AISI 304 stainless steel |
| Cable cover | AISI 304 stainless steel |
| Filter | AISI 431 stainless steel |
| Mating lantern | Technopolymer and brass |
| Crankshaft | AISI 431 stainless steel |
| Engine shirt | AISI 304 stainless steel |
| Isolation | F class |
| Protection | IP X8 |
| Capacitor | 20 μF 450 VL |
| Cable | 20 meters |
Dimensions and weight
 |
MOUTH DN | N° of stages | Ø mm | h mm | Weight |
| 1 1/4" | 6 | 100 | 627 | 11.8kg |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included