Description
DAB EVOPLUS 110/180 SAN M electronic circulator cod.60151147
- Circulation pump for closed and pressurized or open tank domestic hot water systems.
- Pump body in bronze.
- Engine casing in die-cast aluminium.
- Technopolymer impeller.
- Ceramic crankshaft mounted on graphite bushings lubricated by the pumped liquid itself.
- Rotor liner, stator liner and closing flange in stainless steel.
- Ceramic thrust ring, ethylene-propylene seal rings.
- Synchronous motor with permanent magnet rotor.
The SAN version, with a bronze pump body, has been specially developed for the recirculation of sanitary water; using the constant temperature operating mode, the temperature of the water in the recirculation pipe is controlled, without the need to use thermostatic valves, thus optimizing comfort.
The single version can be controlled remotely thanks to the Dconnect service (with the Dconnect Box supplied separately).
Data sheet
Grundfos catalogue
Specifiche
GENERAL | |
---|---|
Template | EVOPLUS 110/180 SAN M |
Code | 60151147 |
Wheelbase | 180mm |
Pump connections | 1" 1/2 |
Standard unions on request | 1"F |
Special unions on request | 1/2” F - 3/4” F - PORT KIT WELD Ø 22 / Ø 28 |
Temperature range of the liquid | from -10°C to +110°C |
Operating pressure | 16bar (1600kPa) |
Insulation class | f |
Circulator protection degree | IP44 |
Compliance with European standard | EN 61800-3 - EN 60335-1 - EN 60335-2-51 |
Installation | with the motor shaft horizontal |
Weight | 4.5kg |
ELECTRICAL DATA | |
---|---|
Phase | Single phase |
Diet | 1x220/240V, 50/60Hz |
P1 Max W | 170 |
In A | 1.16 |
HYDRAULIC DATA | ||||||
---|---|---|---|---|---|---|
Q=m3h | 0 | 2.4 | 3 | 4.2 | 5.4 | 7.2 |
Q=l/min | 0 | 40 | 50 | 70 | 90 | 120 |
H (m) | 11.1 | 10.1 | 9.2 | 7.5 | 5.9 | 3.9 |
Free shipping
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included