The heat exchangers are tools which are a variety of uses. Just to list a few, can be used to separate the various circuits of a heating system is large (fireplaces, stoves, heat pumps, etc), but also to split the heating water and the hot water circuit health.
The plate heat exchanger consists of a sequence of plates in order to increase the exchange surface with a thickness of approximately 0.5-3mm separated from each other at a distance of about 1.5-5 mmthrough a rubber gasket or similar materials.
Each pair of plates defines a chamber, a passage for the hot fluid or the cold fluid in alternate way (to which the first plate and the cold fluid is located on the right side and the hot fluid on the left side, in the next the hot fluid is on the right side and the cold fluid on the left side, and so on). Each plate has four holes (two holes for supply and two drain holes) at the corners of the plate.
contact us via mail: firstname.lastname@example.org